Sharp AR-F15 Service Manual page 170

CHAPTER 5 MECHANICAL CONSTRUCTION
4) Remove the front cover (see I-A-4).
5) Remove the screw [4], and remove the guide
support plate assembly [5]. Then, remove
the buffer roller assembly [6].
4. Removing the Stapler
1) Open the front cover, and move the stapler
assembly to the front.
2) Remove the screw [1], and slide out the sta-
pler assembly [2].
3) Disconnect the connector [4] of the stapler
assembly [3].
5-14
[4]
Figure 5-128
[1]
Figure 5-129
[4]
Figure 5-130
[6]
[5]
[2]
[3]