Sharp AR-F15 Service Manual page 103

1. Receiving Sheets
The stitch unit receives sheets from the finisher unit and outputs them inside the vertical path in
vertical orientation.
The vertical path, while sheets are being output, is configured by two paper deflecting plates.
The position of the sheets being output is set by the paper positioning plate so that the center of
the stack matches the stapling/folding position.
Sheets coming later are output closer to the delivery slot, and the volume of paper that may be
output is as follows:
15 sheets (maximum of 14 sheets of 80 g/m
CHAPTER 3 SADDLE STITCH UNIT BASIC OPERATION
2 + 1 sheet of 256 g/m
Direction of
delivery
Second sheet
Figure 3-202
2 )
First sheet
Paper positioning plate
3-9