Sharp AR-F15 Service Manual page 24

CHAPTER 1 GENERAL DESCRIPTION
4) Hold the empty staple case on its sides, and
slide it out.
Figure 1-311
5) Set a new staple case.
Figure 1-312
Reference:
You may set no more than one staple cartridge at
a time.
Make sure that the new cartridge is one
specifically designed for the finisher unit.
1-16
6) Pull the length of tape (used to hold the sta-
ples in place) straight out.
Figure 1-313
7) Push in the stapler unit until the green lever
returns to its original position.
Figure 1-314
8) Check to make sure that the stapler has been
locked in place, and close the front cover.
Figure 1-315
: Jan. 9 2004
1
1