Checking After Installation - Canon imageRUNNER 2525 Series Service Manual

4. Attach the screw with the stubby driver, and then
connect the connector of Cassette Heater Unit to the
Connector of CST. Feeding Unit.
• 1 Screw (W sems round end; M3x6)
W sems round end; M3x6
1x
1x
5. Attach the Heater Connector Cover
6. Attach the 2 cassettes.
7. Connect the power plug of the host machine to the
outlet.
8. Turn ON the main power switch.
9. Turn ON the heater switch.
■ Disposal Parts Check
1. Following disposal parts are remained after
Connector
367

Checking after Installation

installation procedure.
• In case of Upper Cassette for 550 Sheets Cassette
or 250 Sheets Cassette
[1] Screw 1pc. (When removing the screw from
the Cassette Base.)
• In case of Cassette Module or Upper Cassette for
550 Sheets
[1] Screw 1pc. (When removing the screw from
the Cassette Base.)
[2] Heater connector plate
• In case of CST. Feeding Unit
[1] Heater Connector Cover
[2] Wire Saddle
9. Installation