CAUTION:
When reinstalling the box tray shaft, fit the insertion part
into the hole.
2. Remove the waste toner release lever.
3. Remove the internal cover (right).
• 4 screws
4x
4. Remove the internal cover (right upper).
• 2 screws
2x
5. Remove the front door switch.
• 2 terminals
• 1 screw
1x
Removing the Cassette Size
Detection Switch (SW6/ SW7)
■ Preparation
1. Remove the cassette.
2. Remove the lower rear
Rear Cover" on page 138
3. Remove the option power supply
the Option Power Supply PCB" on page 173
165
4. Disassembly/Assembly
cover."Removing the Lower
PCB."Removing