Inactivity Of The Transmitted License - Canon imageRUNNER 2525 Series Service Manual

A license option confirmation example
To check the validation of license option, see the SPEC REPORT. The details according to the list shown below.
Item Name
Color Universal SEND KIT

■ Inactivity of the transmitted license

Inactivity of the transmitted license
Situation of using this service mode
This service mode is used to invalidate a license under the assumption that, when a device is exceptionally replaced with another
one due to a trouble (caused by the device), the license is transferred to another device. This operation is called "invalidating
transfer of a license".
Since it is possible to select the same device as a destination of the transfer, this service mode can be also used to invalidate a
function on a temporary basis. Careful attention, however, is required because, if you invalidate a function by mistake, you need
to contact a sales company for recovery.
Take utmost precaution when inactivating the license
When invalidating transfer of a license, it is necessary to invalidate the license by entering the service mode and issue a function
invalidation certificate key, which certifies that the license has been invalidated. This operation can be executed for each optional
function. At the point when a function invalidation certificate key is issued, the function is invalidated and becomes unavailable.
When you report this function invalidation certificate key, the serial number of the transfer origination device, the serial number
of the transfer destination device, and the reason why you need to perform the transfer to a sales company, a new license key
is issued for installation for the transfer destination device. Be sure to write down the new license key when you receive it and,
when it is registered in the transfer destination device successfully, inform the user of the new license key and explain him/her
to keep it at hand.
Operation Procedure
1. Enter the service mode and display the following service mode.
(Press one key at once to enter the service mode in the order of "Main, 2, 8, Main".)
When you have entered the service mode, use the left and right arrow keys to display items,and press the OK key to fix the
setting.
2. Display [#LMS].
3. Press the OK key and display [#LMS INACTIVE].
4. Display [ST-SEND].
5. Press the OK key.
License Name
BW-SEND
CL-SEND
#SEND
001 1
OK
282
Status/Optional Setting
ON/ON
ON/ON
Press '2' from the numeric
keypad and press 'OK'.
8. Service Mode