Connecting The Cord - Canon imageRUNNER 2525 Series Service Manual

4. Affix the glass cleaning/lamp caution label or lamp
caution label [B] written in an appropriate language
to the existing label. (The label written in English is
factory-affixed.)
■ Affixing a high temperature caution
label (only for CN and the model with
250-sheet cassette 1)
1. Press the cassette release button to draw out the
cassette forward.
[B]
2. Affix the High Temperature Caution Label to the
specified area. (area between screw holes on the
Base Plate)
CAUTION:
The High Temperature Caution Label uses a label
corresponding to the language.
High temperature Caution label
3. Install the removed Cassettes.

Connecting the Cord

CAUTION:
The specified power must be supplied from outlet.
(Rated voltage ±10% at the rated current)
NOTE:
Install an optionally available document glass cover or the
DADF on the machine. If the model is the one without the
DADF, install a document cover glass. For how to install
the DADF, refer to the DADF Installation Procedure.
318
9. Installation