8. While holding the drum unit at the handle and the
position shown below, insert it into the body slowly
until it stops.
CAUTION:
When inserting the drum unit, check that the drum unit
fits precisely with the rail of the host machine.
9. Turn the lever as shown below to lock the drum unit.
10. Secure the developer pressure lever with the screw.
1x
11. Place the collected toner container in the machine.
12. Lower the lock lever to lock the collected toner
container.
13. Close the front cover.
14. Close the right cover
Installing Trays
1. Install the supplied subtray.
314
9. Installation