Switch; Removing The Front Door Switch (Sw2) - Canon imageRUNNER 2525 Series Service Manual

Switch

Removing the Front Door
Switch (SW2)
■ Preparation
1. Remove the support
Cover" on page 130
2. Remove the tonner supply
Toner Supply Cover" on page 134
3. Remove the waste toner
Waste Toner Container" on page 150
cover."Removing the Support
cover."Removing the
container."Removing the
■ Procedure
1. Remove the box tray.
• 1 box tray shaft
• 1 screw
1x
CAUTION:
When reinstalling the box tray, installation so that the
positioning boss is satisfied in a spring.
164
4. Disassembly/Assembly