Repair Information - HP StorageWorks Edge Switch 2/12 Service Manual

Repair Information

This chapter describes the repair and repair-related procedures for the HP
StorageWorks Edge Switch 2/12, and associated field replaceable units (FRUs).
These procedures are performed using the EWS interface. This chapter describes:
Do not perform repairs until a failure is isolated to a FRU. If fault isolation was
not performed, refer to
Edge Switch 2/12 Service Manual
Procedural Notes, page 90
Using Log Information, page 91
Obtain Port Diagnostic
Collect Maintenance
Set the Switch Online or
Block or Unblock a
Clean Fiber-Optic Components, page 111
Power-On Procedure, page 112
Power-Off Procedure, page 113
IML or Reset the Switch, page 114
Manage Firmware Versions, page 116
Reset Configuration
"MAP 0000: Start
Information, page 92
Data, page 105
Offline, page 107
Port, page 109
Data, page 121
MAP" on page 32.
3
89