A Event Codes - HP StorageWorks Edge Switch 2/12 Service Manual

Event Codes
This appendix lists all three-digit HP StorageWorks Edge Switch 2/12 event codes
and provides detailed information about each code. Event codes are listed in
numerical order and in tabular format.
An event is an occurrence (state change, problem detection, or problem
correction) that requires user attention or that should be reported to a system
administrator or service representative. An event usually indicates a switch
operational state transition, but may also indicate an impending state change
(threshold violation). An event may also provide information only, and not
indicate an operational state change. Event codes are grouped as follows:
•
•
•
•
•
Events are recorded in the event log of the EWS interface or at a simple network
management protocol (SNMP) workstation. An event may also illuminate the
system error (ERR) light-emitting diode (LED) at the switch front panel.
Edge Switch 2/12 Service Manual
000 through 199–system events
300 through 399–fan events
400 through 499–CTP card events
500 through 599–port module events
800 through 899–thermal
A
133