Ctp Card Events (400 Through 499) - HP StorageWorks Edge Switch 2/12 Service Manual

CTP Card Events (400 through 499)

Table 47: Event Code 400
Message: Power-up diagnostics failure.
Severity: Major.
Explanation: Power-on self tests (POSTs) detected a faulty field replaceable unit (FRU) as
indicated by the event data.
Action: If a CTP card failure is indicated, replace the switch. If a fan or power supply failure
is indicated, replace the switch. Perform the procedure described in
Maintenance Data" on page
Event Data: Byte 0 = FRU code as follows: 02 = CTP card, 05 = cooling fan, 06 = power supply
assembly.
Byte 1 = FRU slot number.
Distribution: Switch
EWS
Event
Log
Table 48: Event Code 410
Message: Switch reset.
Severity: Informational.
Explanation: The switch reset due to system power-up, IML, or manual reset. A software reset can
occur automatically after a firmware fault (event code 411), or be user-initiated.
Event data indicates the type of reset.
Action: No action required.
Event Data: Byte 0 = reset type as follows: 00 = power-on, 02 = IML, 04 = reset.
Distribution: Switch
EWS
Event
Log
Edge Switch 2/12 Service Manual
105.
HAFM Appliance
System Event
Error Log
LED
HAFM Appliance
System Event
Error Log
LED
E-Mail Call
Home
E-Mail Call
Home
Event Codes
"Collect
Host
Sense Link
Info Incident
Host
Sense Link
Info Incident
155