Using Log Information - HP StorageWorks Edge Switch 2/12 Service Manual

Using Log Information

The EWS interface provides maintenance personnel with access to event log
information for the Edge Switch 2/12.
To open the EWS event log, click the Log tab at the Monitor panel. The Monitor
panel opens with the Log page displayed
The log information is displayed using the following columns:
You can manage log contents using the following buttons:
Figure 16: Monitor panel (Log page)
Edge Switch 2/12 Service Manual
Date/Time - Date and time the event occurred.
Error Event Code - Three-digit code that describes the event. Event codes
are listed and described in
Severity - Severity of the event (Informational, Minor, Major, or Severe).
Event Data - Up to 32 bytes of supplementary information (if available) in
hexadecimal format. Event data is described in
Clear Event Log Entries - Click this button to delete all entries in the Event
log.
Clear System Error Light - Click the button to extinguish the System Error
LED on the switch.
(Figure 16).
"Event Codes" on page 133.
Repair Information
"Event Codes" on page 133.
91