Set Offline State - HP StorageWorks Edge Switch 2/12 Service Manual

Repair Information

Set Offline State

To set the switch offline from the EWS interface:
1. When the EWS interface opens, the View panel and Switch page appear as
2. Click the Online State tab. The Switch page displays with the Online State
3. Click Set Offline. The switch goes offline and the message Your changes
108
the default. At the View panel, select the Operations option at the left side of
the panel. The Operations panel opens with the Switch page displayed.
tab selected (Figure 23).
have been successfully activated appears.
Edge Switch 2/12 Service Manual