Monitor Panel (Port Stats Page) - HP StorageWorks Edge Switch 2/12 Service Manual

Edge Switch 2/12 Service Manual
— Delimiter errors - Received frames had frame delimiter errors, indicating
the frame arrived at the switch port corrupted. Frame corruption may be
caused by device disconnection, an optical transceiver failure at the
device, a bad fiber-optic cable, or a poor cable connection.
— Address ID errors - Received frames had unavailable or invalid Fibre
Channel destination addresses, or invalid Fibre Channel source addresses.
This typically indicates the destination device is unavailable.
— Frames too short - Received frames were less than the Fibre Channel
minimum size, indicating the frame arrived at the switch port corrupted.
Frame corruption may be caused by device disconnection, an optical
transceiver failure at the device, a bad fiber-optic cable, or a poor cable
connection.
Class 2 statistics - These entries provide information about Class 2 traffic,
including:
— Class 2 frames received and transmitted.
— Four-byte words received and transmitted.
— Busied and rejected frames.
Class 3 statistics - These entries provide information about Class 3 traffic,
including:
— Class 3 frames received and transmitted.
— Four-byte words received and transmitted.
— Discarded frames.
Repair Information
99