Smart Link Configuration Commands; Display Smart-Link Flush; Display Smart-Link Group - HP 7500 Series High Availability Command Reference

Smart Link configuration commands

display smart-link flush

Use display smart-link flush to display information about the received flush messages.
Syntax
display smart-link flush [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display information about the received flush messages.
<Sysname> display smart-link flush
Received flush packets
Receiving interface of the last flush packet
Receiving time of the last flush packet
Device ID of the last flush packet
Control VLAN of the last flush packet
Table 27 Command output
Field
Received flush packets
Receiving interface of the last flush packet
Receiving time of the last flush packet
Device ID of the last flush packet
Control VLAN of the last flush packet

display smart-link group

Use display smart-link group to display information about the specified or all smart link groups.
: 10
: GigabitEthernet1/0/1
: 19:19:03 2010/04/21
: 000f-e200-8500
: 1
Description
Total number of received flush messages.
Port that received the last flush message.
Time when the last flush message was received.
Device ID carried in the last flush message.
Control VLAN ID carried in the last flush message.
84