Dldp Authentication-Mode - HP 7500 Series High Availability Command Reference

Authentication failed packets received : 0
Valid packets received : 3
Interface GigabitEthernet1/0/50
Packets sent : 7
Packets received : 7
Invalid packets received : 3
Loop packets received : 0
Authentication failed packets received : 0
Valid packets received : 4
# Display the statistics on the DLDP packets passing through GigabitEthernet 1/0/49.
<Sysname> display dldp statistics gigabitethernet 1/0/49
Interface GigabitEthernet1/0/49
Packets sent : 6
Packets received : 5
Invalid packets received : 2
Loop packets received : 0
Authentication failed packets received : 0
Valid packets received : 3
Table 22 Command output
Field
Interface
Packets sent
Packets received
Invalid packets received
Loop packets received
Authentication failed packets received
Valid packets received

dldp authentication-mode

Use dldp authentication-mode to configure DLDP authentication.
Use undo dldp authentication-mode to restore the default.
Syntax
dldp authentication-mode { none | { md5 | simple } password }
undo dldp authentication-mode
Default
DLDP authentication is not performed.
Views
System view
Description
Port index.
Total number of DLDP packets sent.
Total number of DLDP packets received.
Number of invalid packets received.
Number of loopback packets received.
Number of received packets that failed to pass the authentication.
Number of valid packets received.
57