Cfd Meplist - HP 7500 Series High Availability Command Reference

Parameters
service-instance instance-id: Specifies the service instance ID, ranging from 1 to 32767.
mep mep-id: Specifies the ID of a MEP, ranging from 1 to 8191.
Examples
# Enable MEP 3 in service instance 5 on GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] cfd mep service-instance 5 mep 3 enable
Related commands
cfd mep

cfd meplist

Use cfd meplist to create a MEP list, which is a collection of local MEPs allowed to be configured and the
remote MEPs to be monitored in the same MA.
Use undo cfd meplist to delete existing MEP lists.
Syntax
cfd meplist mep-list service-instance instance-id
undo cfd meplist mep-list service-instance instance-id
Default
No MEP list is created.
Views
System view
Default command level
2: System level
Parameters
meplist mep-list: Specifies a list of MEP IDs, indicating multiple MEPs, in the format of mep-list = { mep-id
[ to mep-id ] }&<1- 1 0>, in which mep-id represents the MEP ID and ranges from 1 to 8191. &<1- 1 0>
indicates you can specify up to 10 MEP ID ranges.
service-instance instance-id: Specifies the service instance ID, ranging from 1 to 32767.
Usage guidelines
Before you create a MEP list, create the relevant MD, MA, and service instance.
After you delete a MEP list, all local MEP configurations based on this list are deleted.
Examples
# Create a MEP list that includes MEP 9 through MEP 15 in service instance 5.
<Sysname> system-view
[Sysname] cfd md test_md level 3
[Sysname] cfd ma test_ma md test_md vlan 100
[Sysname] cfd service-instance 5 md test_md ma test_ma
[Sysname] cfd meplist 9 to 15 service-instance 5
33