Syntax
vrrp ipv6 dscp dscp-value
undo vrrp ipv6 dscp
Default
The DSCP priority of VRRP packets is 56.
Views
System view
Default command level
2: System level
Parameters
dscp-value: DSCP priority of VRRP packets, which ranges from 0 to 63.
Usage guidelines
This command is available in Release 6703 and later versions.
Examples
# Configure the DSCP priority of VRRP packets as 30.
<Sysname> system-view
[Sysname] vrrp ipv6 dscp 30
vrrp ipv6 method
Use vrrp ipv6 method to specify the type of MAC addresses mapped to the virtual IPv6 addresses of the
VRRP groups.
Use undo vrrp ipv6 method to restore the default.
Syntax
vrrp ipv6 method { real-mac | virtual-mac }
undo vrrp ipv6 method
Default
The virtual MAC addresses are mapped to the virtual IP addresses of the VRRP groups.
Views
System view
Default command level
2: System level
Parameters
real-mac: Maps the real MAC address of the interface to the virtual IPv6 addresses of VRRP groups.
virtual-mac: Maps the virtual MAC addresses to the virtual IPv6 addresses of VRRP groups.
Examples
# Map the virtual IPv6 address of the current VRRP group to the real MAC address of the interface.
<Sysname> system-view
[Sysname] vrrp ipv6 method real-mac
119