Track Nqa - HP 7500 Series High Availability Command Reference

object is Negative. To display the IPv6 protocol status of an interface, use the display ipv6 interface
command.
delay: Specifies that the track module notifies the application modules of the track entry status change
after a specific delay time. If this keyword is not specified, the track module immediately notifies the
application modules when the track entry status changes.
negative negative-time: Specifies the delay time for the track module to notify the application modules
that the status of the track entry has changed to Negative. The negative-time argument represents the
delay time, in the range of 1 to 300, in seconds.
positive positive-time: Specifies the delay time for the track module to notify the application modules that
the status of the track entry has changed to Positive. The positive-time argument represents the delay time,
in the range of 1 to 300, in seconds.
Usage guidelines
After a track entry is created, you cannot change its settings except the delay time. To change the delay
time, use the track interface protocol delay command. To modify other settings of this track entry, first
delete the entire track entry, and then create a new track entry.
Examples
# Create track entry 1, and associate it with the IPv4 protocol status of VLAN-interface 2.
<Sysname> system-view
[Sysname] track 1 interface vlan-interface 2 protocol ipv4
Related commands
display ip interface brief (Layer 3—IP Services Command Reference)
•
display ipv6 interface (Layer 3—IP Services Command Reference)
•
• display track

track nqa

Use track nqa to create a track entry, associate it with the specified reaction entry of the NQA test group,
and specify the delay time for the track module to notify the application modules when the status of the
track entry changes.
Use undo track to remove the track entry.
Syntax
track track-entry-number nqa entry admin-name operation-tag reaction item-number [ delay { negative
negative-time | positive positive-time } * ]
undo track track-entry-number
Default
No track entry exists.
Views
System view
Default command level
2: System level
Parameters
track-entry-number: Track entry ID, which ranges from 1 to 1024.
143