Related commands
cfd ma
•
cfd md
•
•
cfd service-instance
cfd mip-rule
Use cfd mip-rule to configure the rules for generating MIPs. MIPs are automatically generated on each
port according to the rules configured.
Use undo cfd mip-rule to delete the rule for generating MIPs.
Syntax
cfd mip-rule { default | explicit } service-instance instance-id
undo cfd mip-rule service-instance instance-id
Default
No rules for generating MIPs are configured and no MIPs exist.
Views
System view
Default command level
2: System level
Parameters
default: Specifies that if the lower level MA is not configured with MIPs, the current MA creates MIPs.
explicit: Specifies that if the lower level MA is not configured with MIPs, whether the current MA creates
MIPs depends on whether the lower level MA is configured with MEPs.
service-instance instance-id: Specifies the service instance ID, ranging from 1 to 32767.
Examples
# Configure the MIP generation rule as default in service instance 5.
<Sysname> system-view
[Sysname] cfd mip-rule default service-instance 5
cfd service-instance
Use cfd service-instance to create a service instance with the MD name.
Use undo cfd service-instance to delete a service instance.
Syntax
cfd service-instance instance-id md md-name ma ma-name
undo cfd service-instance instance-id
Default
No service instance is created.
Views
System view
34