Displaying And Maintaining Track Entries; Track Configuration Examples; Vrrp-Track-Nqa Collaboration Configuration Example - HP VSR1000 High Availability Configuration Manual

Step
2. Create a policy or policy
node and enter PBR policy
node view.
3. Define a match criterion.
4. Associate Track with IPv6
PBR.

Displaying and maintaining track entries

Execute display commands in any view.
Task
Display information about a specific or all track entries.

Track configuration examples

VRRP-Track-NQA collaboration configuration example

In this example, the master monitors the uplink.
Command
ipv6 policy-based-route policy-name [ deny |
permit ] node node-number
•
Define an IPv6 packet length match
criterion:
if-match packet-length min-len max-len
•
Define an ACL match criterion:
if-match acl { acl6-number | name
acl6-name }
•
Set the outgoing interface, and associate it
with a track entry:
apply output-interface { interface-type
interface-number [ track
track-entry-number ] }&<1-n>
•
Set the next hop, and associate it with a
track entry:
apply next-hop [ vpn-instance
vpn-instance-name | inbound-vpn ]
{ ipv6-address [ direct ] [ track
track-entry-number ] }&<1-n>
•
Set the default outgoing interface, and
associate it with a track entry:
apply default-output-interface
{ interface-type interface-number [ track
track-entry-number ] }&<1-n>
•
Set the default next hop, and associate it
with a track entry:
apply default-next-hop [ vpn-instance
vpn-instance-name | inbound-vpn ]
{ ipv6-address [ direct ] [ track
track-entry-number ] }&<1-n>
Command
display track { track-entry-number | all }
62
Remarks
N/A
By default, no packets
are filtered.
Use at least one of the
commands.