Table of Contents
Advertisement
Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
Electrical system
Dashboard
In case of doubts in operation of the engine revs indication, it is possible to connect the vehicle to the
diagnosis instrument and activate the engine revs indication choosing the function "Rpm indicator" from
the "Devices Activation" screen page (injector icon)
Installing a new instrument panel
In case the instrument panel is replaced by a new one, follow the procedure shown below so that the
immobilizer system (key storage) and the exhaust butterfly valve (controlled by the ECU through the
instrument panel) operate correctly.
1. Request all the keys of the vehicle in the customer possession.
Once the instrument panel is electrically connected to the vehicle and a key is set to ON, the key is
stored and the instrument panel waits for 20 seconds for a possible second key. If there is a second
key, remove the first key and wait for the storage of the second key. When the second key storage is
complete, the instrument panel waits for another key up to a maximum of 4 total keys or the procedure
will be interrupted after 20 seconds.
At this stage, the instrument panel turns on as usual.
2. Deleting the errors stored by the instrument panel: select Menu and then Diagnosis. An access code
is required to enter this menu:
98789
Then, select the option: "Delete errors"
NOTE
DELETE THE ERROR CAUSED BY THE LACK OF MEMORY OF KEY CODES.
3. Connect to the vehicle with the diagnosis tool and select the adjustable Parameters in the screen
page:
"Exhaust butterfly valve self-acquisition"
NOTE
SEARCH FOR MINIMUM AND MAXIMUM MECHANICAL STOPS STORED IN THE INSTRUMENT
PANEL.
In case of a correct self-acquisition, the procedure is finished.
If the self-acquisition is not performed correctly, follow the procedure "Exhaust butterfly valve calibra-
tion" as shown in the section: Electrical system, Checks and controls, Exhaust butterfly valve.
See also
Butterfly valve in
exhaust
Diagnosis
An access code is required to enter this menu which controls the diagnosis function:
•
ENTER SERVICE CODE
ELE SYS - 120
email: info@motomatrix.co.uk
DORSODURO 1200 ABS - ATC
Advertisement
Table of Contents
