Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
Braking system
•
C. +12V at PIN 4 with key ON
4. ARE THERE ANY ERRORS? (YES, go to 5; NO, go to 6)
5. CONSULT THE TABLE ERROR DISPLAY
6. ABS WARNING LIGHT ACTIVATION
7. CONTACT TECHNICAL SERVICE
8. CHECK:
•
A. Cable continuity between PIN 8 of the ABS control unit connector and PIN 28 of the
instrument panel.
•
B. Check connectors - refer to the operations described in the chapter
If the previous checks are OK, the causes might be:
•
C. ABS control unit malfunction
•
D. Instrument panel malfunction
NOTE: to check the wheel speed sensor using the NAVIGATOR, follow the instructions given in
chapter "ELECTRICAL SYSTEM/CHECKS AND TESTS/SPEED SENSOR".
Using Navigator for the abs
Abs screen pages
ECU INFO screen page
This screen page shows general data regarding
the control unit, for example software type, map-
ping, control unit programming date
Characteristic
Vehicle manufacturing date
Chassis number
Software version
Vehicle code
Vehicle identification according to
state of Pins 2 and 15
BRAK SYS - 352
email: info@motomatrix.co.uk
DORSODURO 1200 ABS - ATC
ACTIVE?(YES, go to 7; NO, go to 8)
INFO ECU SCREEN PAGE
Value/example
Unit of
measure
ment
Dorsoduro 1200
Norge / Stelvio / Identi-
fication provided by
ECU
Notes
The vehicle code stored in the control unit is read.
A different type of vehicle is associated with each
configuration of PIN 2 and PIN 15 connections.