Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
Troubleshooting
If there is continuity, go to MAIN INJECTION RELAY 17 CHECK; if there is not continuity, restore
MAIN INJECTION RELAY 17 CHECK
•
1. WITH KEY SET TO OFF, DISCONNECT THE RELAY CONNECTOR AND CHECK
CONTINUITY OF BLUE CABLE WITH GROUND
If there is continuity, go to 2; if there is not continuity, restore cable harness - END
•
2. WITH KEY SET TO OFF, DISCONNECT THE RELAY CONNECTOR AND CHECK IF
THERE IS VOLTAGE ON RED/WHITE CABLE
YES, go to 3; NO, restore the cable harness - END
•
3. CHECK CORRECT OPERATION OF THE RELAY: PROVIDE VOLTAGE ON THE PIN
CORRESPONDING TO THE GREEN/BLACK CABLE; AND GROUND ON THE PIN COR-
RESPONDING TO THE BLUE CABLE. IS THERE CONTINUITY BETWEEN THE OTHER
TWO RELAY PINS?
•
4. CHECK CONTINUITY OF THE GREEN/BLACK CABLE FROM THE KEY CONNECTOR
AT PIN 3 OF THE RELAY CHECKING ALSO THE KEY SWITCH CONNECTOR AND RE-
LAY CONNECTOR
If there is continuity, go to 5; if there is not continuity, restore cable harness - END
•
5. WITH KEY SET TO OFF, CHECK IF THERE IS VOLTAGE ON RED/WHITE CABLE ON
THE KEY SWITCH CONNECTOR
YES, go to 6; NO, restore the cable harness - END
•
6. WITH KEY SET TO ON AND CONNECTOR DISCONNECTED, CHECK ON THE
SWITCH SIDE IF THERE IS LACK OF CONTINUITY BETWEEN THE TWO PINS COR-
RESPONDING TO THE RED/WHITE CABLE AND GREEN BLACK AND REPLACE THE
KEY SWITCH- END
STARTER BUTTON CHECK
•
1. WITH KEY SET TO "ON" DISCONNECT THE SWITCH CONNECTOR (6 ways, black,
at the centre, between filter box and water radiator) AND CHECK IF THERE IS VOLTAGE
+ 5V ON PIN 4 ON THE CABLE HARNESS SIDE
•
2. WITH CONNECTOR DISCONNECTED (6 ways, black, at the centre, between filter box
and water radiator) CHECK IF THERE IS GROUND CONNECTION ON PIN 5 ON THE
CABLE HARNESS SIDE
TROUBL - 84
email: info@motomatrix.co.uk
cable harness - END
YES, go to 4; NO, replace the relay - END
YES, go to 2; NO, go to 5
YES, go to 3; NO, go to 6
DORSODURO 1200 ABS - ATC