ZyXEL Communications P-660HN-51 User Manual page 62

Table 8 Network Settings > Wireless > General (continued)
LABEL DESCRIPTION
Wireless The SSID (Service Set IDentity) identifies the service set with which a wireless device is
Network Name associated. Wireless devices associating to the access point (AP) must have the same
(SSID) SSID.
Enter a descriptive name (up to 32 English keyboard characters) for the wireless LAN.
Hide SSID Select this check box to hide the SSID in the outgoing beacon frame so a station
cannot obtain the SSID through scanning using a site survey tool.
Client Isolation Select this check box to prevent the wireless client connected to the Zyxel Device from
communicating with other wireless clients.
MBSSID/LAN Select this check box to prevent wireless devices of other BSSIDs/LAN to communicate
Isolation with the wireless client.
Enhance Select this check box to allow the Zyxel Device to convert wireless multicast traffic into
Multicast wireless unicast traffic.
Forwarding
Security Level
Security Mode Select Basic (WEP) or More Secure (WPA(2)-PSK, WPA(2)) to add security on this wireless
network. The wireless clients which want to associate to this network must have same
wireless security settings as the Zyxel Device. When you select to use a security,
additional options appears in this screen.
Or you can select No Security to allow any client to associate this network without any
data encryption or authentication.
See the following sections for more details about this field.
Apply Click Apply to save your changes.
Cancel Click Cancel to restore your previously saved settings.
Chapter 6 Wireless
P-660HN-51 User's Guide
62