Access The Zyxel Device Using Ddns - ZyXEL Communications P-660HN-51 User Manual

Table 4 IP Settings in this Tutorial
DEVICE / COMPUTER
R's N2
B
To configure a static route to route traffic from N1 to N2:
Log into the Zyxel Device's Web Configurator in advanced mode.
1
Click Advanced > Routing.
2
Click Add New Static Route Entry in the Static Route screen.
3
Configure the Static Route Setup screen using the following settings:
4
Select the Active check box. Enter the Route Name as R.
4a
Type 192.168.10.0 and subnet mask 255.255.255.0 for the destination, N2.
4b
Type 192.168.1.253 (R's N1 address) in the Gateway IP Address field.
4c
Click Apply.
4a
Now B should be able to receive traffic from A. You may need to additionally configure B's firewall
settings to allow specific traffic to pass through.

4.6 Access the Zyxel Device Using DDNS

If you connect your Zyxel Device to the Internet and it uses a dynamic WAN IP address, it is inconvenient
for you to manage the device from the Internet. The Zyxel Device's WAN IP address changes
dynamically. Dynamic DNS (DDNS) allows you to access the Zyxel Device using a domain name.
Chapter 4 Tutorials
IP ADDRESS
192.168.10.2
192.168.10.33
P-660HN-51 User's Guide
43