Macintosh Os X - ZyXEL Communications P-660HN-51 User Manual

• From the Configure box, select Manually.
• Type your IP address in the IP Address box.
• Type your subnet mask in the Subnet mask box.
• Type the IP address of your Zyxel Device in the Router address box.
Close the TCP/IP Control Panel.
5
Click Save if prompted, to save changes to your configuration.
6
Turn on your Zyxel Device and restart your computer (if prompted).
7
Verifying Settings
Check your TCP/IP properties in the TCP/IP Control Panel window.

Macintosh OS X

Click the Apple menu, and click System Preferences to open the System Preferences window.
1
Figure 150 Macintosh OS X: Apple Menu
Click Network in the icon bar.
2
• Select Automatic from the Location list.
• Select Built-in Ethernet from the Show list.
• Click the TCP/IP tab.
For dynamically assigned settings, select Using DHCP from the Configure list.
3
Appendix A Setting up Your Computer's IP Address
P-660HN-51 User's Guide
250