Chassis Physical Specifications For Acx500 Routers - Juniper ACX500 Hardware Manual

ACX500 Universal Access Router Hardware Guide
Table 19: Site Preparation Checklist (continued)
Item or Task
Hardware Configuration
Choose the number and types of routers you
want to install.
Rack, Cabinet, Wall or Pole
Verify that your rack, cabinet, pole, or wall
meets the minimum requirements for the
installation of the router.
Plan rack or cabinet location, including required
space clearances.
Secure the rack or cabinet to the floor and
building structure.
Cables
Acquire cables and connectors:
Determine the number of cables needed
based on your planned configuration.
Review the maximum distance allowed for
each cable. Choose the length of cable based
on the distance between the hardware
components being connected.
Plan the cable routing and management.
Related
Documentation

Chassis Physical Specifications for ACX500 Routers

54
For More Information
"ACX500 Universal Access Router
Overview" on page 3
"Rack Requirements for ACX500
Indoor Routers" on page 57
"Cabinet Requirements for ACX500
Indoor Routers" on page 58
"Wall Requirements for ACX500
Outdoor Routers" on page 60
"Pole Requirements for ACX500
Outdoor Routers" on page 60
"Clearance Requirements for Airflow
and Hardware Maintenance on
ACX500 Routers" on page 61
Installing and Connecting an ACX500 Indoor Router Overview on page 101
Installing and Connecting an ACX500 Outdoor Router Overview on page 102
General Site Guidelines for ACX Series Routers on page 69
The ACX500 router is a rigid sheet-metal structure that houses the hardware components.
Table 20 on page 55, Table 21 on page
physical specifications of the ACX500 routers.
Performed by
55, and Table 22 on page 55
Copyright © 2016, Juniper Networks, Inc.
Date
summarize the