Table of Contents
Advertisement
Appendix A. Records
Whenever you add options to your DS4200 Express, be sure to update the
information in this appendix. Accurate, up-to-date records make it easier to add
other options and provide needed data whenever you contact your IBM technical
support representative.
Identification numbers
Record and retain the following information.
The serial number is located on the bottom inside surface at the rear and on the left
edge at the front of the DS4200 Express. See Figure 10 on page 24.
Storage subsystem and controller information record
Table 35 provides a data sheet for recording storage subsystem names,
management types, Ethernet hardware addresses, and IP addresses. Make a copy
of this table and complete the information for your storage subsystems and
controllers. Use the information to set up the BOOTP table for the network server
and the host or Domain Name System (DNS) table. The information is also helpful
if you add storage subsystems after initial installation. Refer to your Storage
Manager documentation for detailed instructions about how to obtain the
information. For a sample information record, see Table 36 on page 145.
Table 35. Storage subsystem and controller information record
Storage
subsystem
name
© Copyright IBM Corp. 2006
Product name:
Machine type:
Model number:
Serial number:
Management
method
IBM System Storage DS4000 DS4200 Express
Storage Subsystem
1814
7VA, 7VH
Controllers-Ethernet and IP
addresses, and host name
Host-IP address
and host name
143
Advertisement
Table of Contents
