Table of Contents
Advertisement
Figure 31. Removing the LC-LC fibre-channel cable
3. Replace the protective caps on the cable ends.
4. Replace the protective cap on the SFP module.
Using LC-SC fibre-channel cable adapters
The LC-SC fibre-channel cable adapter is a fiber-optic cable that is used to connect
an LC connector into one of the following devices that require SC connectors:
v 1-Gbps fibre channel switch
v Fibre channel host bus adapter
Attention:
The DS4200 Express does not support the attachment of storage
expansion enclosures that operate at 1 Gbps, such as the EXP500.
For more information about connecting to these devices, see the documentation
that comes with the LC-SC fibre-channel cable adapter.
LC connector
SC connector
Figure 32. LC-SC fibre-channel cable adapter
The following sections provide the procedures for properly connecting and removing
an LC-SC fibre-channel cable.
Connecting an LC-SC cable adapter to a device
Complete the following steps to connect an LC-SC fibre-channel cable adapter to a
device:
Statement 3:
51
Chapter 3. Cabling the storage subsystem
Advertisement
Table of Contents
