Table of Contents
Advertisement
CAUTION:
When laser products (such as CD-ROMs, DVD drives, fiber optic devices, or
transmitters) are installed, note the following:
v Do not remove the covers. Removing the covers of the laser product could
v Use of controls or adjustments or performance of procedures other than
DANGER
Attention:
damage from static electricity. For details about handling static-sensitive devices,
see "Handling static-sensitive devices" on page 25.
To install an SFP module, complete the following steps:
1. Remove the SFP module from its static-protective package.
2. Remove the protective cap from the SFP module, as shown in Figure 23. Save
Protective cap
Figure 23. SFP module and protective cap
3. Remove the protective cap from the SFP port. Save the protective cap for future
4. Insert the SFP module into the host port until it clicks into place. See Figure 24
46
IBM System Storage DS4200 Express Storage Subsystem: Installation, User's and Maintenance Guide
result in exposure to hazardous laser radiation. There are no serviceable
parts inside the device.
those specified herein might result in hazardous radiation exposure.
Some laser products contain an embedded Class 3A or Class 3B laser
diode. Note the following.
Laser radiation when open. Do not stare into the beam, do not view directly
with optical instruments, and avoid direct exposure to the beam.
When you handle static-sensitive devices, take precautions to avoid
the protective cap for future use.
Plastic tab
use.
on page 47.
SFP module
Advertisement
Table of Contents
