Setting Up A Computer For Printing/Sending A Fax; Connecting To A Tcp/Ip Network; Connecting To A Netbios Network - Canon IMAGERUNNER 4570 Network Manual

Setting Up a Computer for Printing/Sending a Fax

After you have completed the protocol settings, you are ready to set up each of the
computers for printing or sending a fax.
IMPORTANT
You can only print or send a fax from a computer if the optional equipment is installed.
For the equipment needed, see "Optional Equipment and System Environment
Requirements," on p. 1-2.

Connecting to a TCP/IP Network

All computers that use the machine for printing or sending a fax must have TCP/IP
client software installed and must be enabled for TCP/IP network use. For details,
see the manuals provided with the operating system.

Connecting to a NetBIOS Network

All computers that use the machine for printing or sending a fax must be enabled for
NetBIOS network use.
See the procedures referenced below to set the computers.
•
Windows 98/Me: See "Windows 98/Me," on p. 5-12.
•
Windows 2000/XP/Server 2003: See "Windows 2000/XP/Server 2003," on
p. 5-13.
•
Windows NT 4.0: See "Windows NT 4.0," on p. 5-14.
IMPORTANT
The following procedures describe a sample NetBIOS setup. Depending on your
environment, the actual setup procedure may differ.

Setting Up a Computer for Printing/Sending a Fax

5
5-11