Setting Up A Computer For Printing/Sending A Fax; Connecting To A Netware Network; Printer Connection Method - Canon IMAGERUNNER 4570 Network Manual

Setting Up a Computer for Printing/Sending a Fax

After you have completed NetWare print service settings and printer protocol
settings, you are ready to set up each of the computers for printing or sending a fax.
IMPORTANT
You can only print or send a fax from a computer if the optional equipment is installed.
For the equipment needed, see "Optional Equipment and System Environment
Requirements," on p. 1-2.

Connecting to a NetWare Network

In order to use the NetWare network, all computers that will perform printing or
sending a fax need to have NetWare client software installed. For details, see your
NetWare and operating system manuals.

Printer Connection Method

Install the driver according to the following procedures indicated in the manual for
each driver. (The UFR II printer driver is not available for Windows NT.)
•
If you want to use the PCL printer driver
See the procedure for standard installation in Chapter 2, "Getting Started," in the
PCL Driver Guide.
•
If you want to use the PS printer driver
See the procedure for standard installation in Chapter 2, "Getting Started," in the
PS Driver Guide.
•
If you want to use the UFR II printer driver
See the procedure for standard installation in Chapter 2, "Getting Started," in the
UFR II Driver Guide.
• If you want to use the fax driver
See the procedure for standard installation in Chapter 2, "Getting Started," in the
Fax Driver Guide.
When the dialog box for selecting the port appears during installation, click [Use
Network Printer] © [Settings]. From the list, select the print queue that you created
in "NetWare Print Service Settings," on p. 4-3.

Setting Up a Computer for Printing/Sending a Fax

4
4-17