Canon IMAGERUNNER 4570 Network Manual page 68

3
3-22 Protocol Settings
❑
Press [OK].
The display returns to the IP Address Range Settings screen.
G If you do not want to restrict the IP addresses of computers on
which the machine setting items can be set or browsed (using the
Remote UI or utility):
❑
On the TCP/IP Settings screen, press [M] or [L] until [IP Address Range
Settings] appears © press [IP Address Range Settings].
❑
Press [Permit IP Address(es)] for <Setting/Browsing Range>.
❑
Press [Off] for <Apply Settings> © press [OK].
The display returns to the IP Address Range Settings screen.
❑
Press [Reject IP Address(es)] for <Setting/Browsing Range>.