Ftp Server For Imageware Gateway - Canon IMAGERUNNER 4570 Network Manual

NOTE
For instructions on how to specify recipient address settings, see Chapter 2, "Basic
Sending Methods," in the Sending and Facsimile Guide.
The settings for sending data to the FTP server are complete.

FTP Server for imageWARE Gateway

NOTE
An FTP server for imageWARE Gateway is required for receiving data from the machine,
when used with imageWARE Gateway.
1
Set up the FTP server for imageWARE Gateway.
For details about the settings, see the imageWARE Gateway User's Guide.
2
On the FTP server for imageWARE Gateway, specify the folder
to store data sent from the machine.
For details about the settings, see the imageWARE Gateway User's Guide.
NOTE
•
Up to 128 alphanumeric characters can be entered for a folder name.
•
Enter a user name and a password not longer than 24 alphanumeric characters.
3
On the FTP server for imageWARE Gateway, export
destination data.
For details about the settings, see the imageWARE Gateway User's Guide.
IMPORTANT
•
A DNS server is needed to use an FQDN format (for example,
starfish.organization.company.com) for the FTP server address. (A DNS server is
also required if the machine and the FTP server are in the same subnet.) If you
have not set up a DNS server, use IP addresses.
•
Up to 128 alphanumeric characters can be entered for an FTP server address of
the FQDN format.
Setting Up a Computer as a File Server
3
3-89