Registering A Ca Certificate File Installed From A Computer - Canon IMAGERUNNER 4570 Network Manual

6
Press [Done].
The display returns to the TCP/IP Settings screen.
7
Press [Done] repeatedly until the Additional Functions screen
closes.
8
Restart the machine.
❑
Turn OFF the machine, wait at least 10 seconds, and then turn it ON.
NOTE
For instructions on how to turn ON/OFF the machine, see Chapter 1, "Before You
Start Using This Machine," in the Reference Guide.
The procedure for editing key pairs is complete.
Registering a CA Certificate File Installed from a Computer
Apart from the X.509 (DER) format CA certificate preinstalled in the machine, you
can also register a CA certificate file which has been installed using a web browser
(Remote UI).
The procedure for registering installed files in the machine using the control panel
is as follows:
IMPORTANT
For instructions on how to install a CA certificate file, see the Remote UI Guide.
NOTE
Up to 50 CA certificate files can be registered.
1
(Additional Functions) © [System Settings] ©
Press
[Network Settings].
2
Press [TCP/IP Settings].
The TCP/IP Settings screen is displayed.
Protocol Settings 3-39
3