7
8
4
NetWare print service settings are complete. Proceed to "Protocol Settings," on p. 4-9.
4-8
NetWare Print Service Settings
Press [ESC] on the keyboard repeatedly until you return to the
[Exit PCONSOLE] window © select [Yes] to quit PCONSOLE.
If you are using the remote printer mode, start the print
server.
❑
If you are using a NetWare file server as a print server, enter <LOAD
PSERVER.NLM (print server name)> on the file server © press [ENTER] on
the keyboard.
❑
If you are using a dedicated print server, enter <PSERVER.EXE> © enter the
print server name on the print server © press [ENTER] on the keyboard.
NOTE
This step is not required if you are using the queue server mode.