Canon IMAGERUNNER 4570 Network Manual page 130

3
The settings for sending data to the FTP server are complete.
3-84 Setting Up a Computer as a File Server
•
The machine's recipient settings:
The Protocol drop-down list: FTP
[Host Name]:
[File Path]:
[User]:
[Password]:
IMPORTANT
•
To use the host name confirmed in step 4 for [Host Name] as shown in the above
example, it is necessary to use a DNS server. (This applies even if the machine
and the FTP server are in the same subnet.) If no DNS server is available, the host
name setting should be specified using the IP address of the FTP server.
•
Up to 128 alphanumeric characters can be entered for both [Host Name] and [File
Path] on the control panel.
•
If you switch the language of the touch panel display, [Host Name] and [File Path]
may not be displayed correctly.
•
If the FTP port number is set to a value other than 21, specify the following for
[Host Name]:
<IP address of FTP server>:<Port number>
Example: 192.168.1.21:21000
NOTE
For instructions on how to specify recipient address settings, see Chapter 2, "Basic
Sending Methods," in the Sending and Facsimile Guide.
starfish.organization.company.com
share
User name entered in step 5
Password for the above user