7526
Operator panel bezel removal
See Operator panel bezel on
Rotate the operator panel to its highest position.
1.
Using a flathead screwdriver or similar tool, unsnap the locking tabs on the upper left and the upper right of
2.
the bezel. The tabs on the right and left side will then release.
3.
Rotate the bezel down, and remove the bezel.
Installation note: When reinstalling or replacing the bezel, insert the bottom of the bezel first, ensuring that the
bezel bottom portion fully seats.
Service Manual
4-32
for the part number.
page 7-3
Previous
Next
Go Back