Factory Defaults; Energy Conserve - Lexmark X734de Service Manual

Factory Defaults

This menu item resets the majority of printer values back to their factory default settings.
Warning: This selection cannot be reversed, so this operation should only be used as a last resort to fix any
printer problem.
When factory default settings are restored:
• All downloaded resources (fonts, macros, symbol sets) in the printer memory (RAM) are deleted.
All menu settings return to the factory default setting except:
•
The Display Language setting in the "Setup" Menu.
–
All settings in the Parallel Menu, Serial Menu, Network Menu, Infrared Menu, LocalTalk Menu, and
–
USB Menu.
Restore LES—all non-standard applications are removed, all frame-work and standard application settings
•
are reset to their factory default values, and then the SE logs are cleared.
To restore Factory Defaults:
Print Menu Settings from the Administration Menu, the Diagnostic Menu, and the Config Menu.
1.
If you need to reset customer settings you have a record.
Touch Factory Defaults from the Config Menu.
2.
3. Touch Restore Base, Restore STD NET, or Restore LES. The Restore Network value only appears on
printer models that have integrated network support.
Restoring Factory Defaults... appears on the operator panel while factory defaults are restored.
Resetting the Device... appears and the MFP performs a POR.
After a POR, the printer starts in the Home state.

Energy Conserve

This menu item affects the values that appear in the Power Saver menu on the operator panel. Energy
Conserve only appears when the Power Saver feature is disabled.
Select Off in Energy Conserve to add a menu item to the Power Saver called Disabled. Energy Conserve does
not disable Power Saver, it only allows the users to select Disable. When On (default) is selected in the Energy
Conserve menu Disabled does not appear on as a choice in the Power Saver menu. Power Saver cannot be
disabled from the user's operator menu.
To change the Energy Conserve setting:
Touch Energy Conserve on the Config Menu.
1.
Touch the left arrow or the right arrow to toggle between On and Off.
2.
Touch Submit.
3.
Submitting changes... is displayed.
You are automatically returned to the Configuration main menu.
7526
Previous
Go Back
Diagnostic aids
3-35
Next