Screw and retainer identification table
The following table contains screw types and retainers, locations, and quantities necessary to service the
printer. Pay careful attention to each screw type location when doing removals. You must install the correct
screw type in each location during reassembly.
Sizes are as close to actual as possible, as long as the printout is not scaled or resized.
Screw identification table
P/N
Screw type
077-0601-0
Plastite M3x6, black
077-0819-0
Plastite washer
M3x8
077-0824-0
Plastite M4x8
077-1408-0
Plastite M4x14
10B1580
#6 Panhead
Location
CCD cover
CCD Lamp
CCD Lamp cover
Rear cover
CCD belt to flatbed
Upper housing
Hinges to ADF
Cooling fan to top cover
7526
Qty
2
2
2
6
1
6
4
2
Repair information
4-3
Previous
Next
Go Back