Eject Motor - Brother DCP-L5500D Service Manual

9.36 Eject motor

(1) Release the eject motor harness from the securing fixtures.
(2) Remove the two taptite bind B M3x10 screws, and remove the eject motor plate from the
main frame L ASSY.
(3) Remove the screw bind M3x4 screw. Turn the eject motor in the direction of the arrow,
and remove it from the eject motor plate.
(4) Disconnect the eject motor harness from the eject motor.
Screw bind M3x4
Main frame L ASSY
Harness routing: Refer to
Eject motor harness
Eject motor
Fig. 3-105
"10. Left side of the
3-105
Screw bind M3x4
Eject motor
Taptite bind B M3x10
Eject motor plate
machine".
Confidential