MFC‑8530DN / MFC‑8535DN / MFC‑8540DN
Quick Setup Guide
Unpack the machine and check the components
Drum Unit and Toner
Cartridge Assembly
Quick Setup Guide
Installation CD‑ROM
1
Remove the packing materials and install the drum unit and toner cartridge assembly
2
Load paper in the paper tray
3
Connect the power cord and turn the machine on
Back
4
Connect the telephone line cord
If you do not plan to use the fax feature on this machine, go to step
NOTE:
• For more information on using the fax feature, see the Basic User's Guide.
• Your machine is programmed to automatically receive faxes. To change this default mode, see the Basic User's
Guide.
Telephone Line Cord
Product Safety Guide
Discard the silica gel pack.
Adjust the paper
Front
.
Read the Product Safety Guide first, then read this Quick
Setup Guide for the correct installation procedure.
The latest manuals are available at the Brother Solutions
Center: solutions.brother.com/manuals.
USB Interface Cable
Basic User's Guide
guides.
5
Select your language (if needed)
1.
On the machine's Touchscreen,
press
[所有设置] (All Settings) >
[初始设置] (Initial Setup) >
[语言] (Local Language).
2.
Press your language.
3.
Press
NOTE:
• Use the appropriate interface cable for the connection you want to use. (Network
cable is not a standard accessory.)
USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no more than
2 metres long.
Network cable
Please purchase a straight-through Category 5 (or greater) twisted-pair cable
for the machine.
• The illustrations in this Quick Setup Guide show the MFC-8540DN.
Remove the orange part.
[设置] (Settings) >
.
CHN-ENG
Version A