Table of Contents
Advertisement
Paper jams in the ejecting section
<User Check>
• Check that the paper is set in each paper tray correctly.
• Flip over the paper in each paper tray or rotate the paper 180°.
• Adjust the paper guide according to the paper size.
• Check that there is not too much paper set in each paper tray.
• Check that the thickness of the paper is 60 to 120 g/m
and 60 to 200 g/m
• Flip through the paper and reset it in each paper tray.
Step
Foreign object in the rear of the
1
machine
2
Eject actuator coming off
Connection failure of the eject
3
sensor harness
Connection failure of the eject
4
motor harness
5
Fuser cover attachment failure
6
Eject sensor failure
7
Eject motor failure
Damaged gears in the ejecting
8
system
9
Fuser unit failure
10
Main PCB failure
Paper jams in the duplex tray
<User Check>
• Flip over the paper in each paper tray or rotate the paper 180°.
• Check that the thickness of the paper is 60 to 105 g/m
• Flip through the paper and reset it in each paper tray.
• Use A4 or Letter paper (specified by the manufacturer).
Step
Foreign object in the duplex
1
paper feeding system
2
Fuser cover attachment failure
3
Back cover failure
4
Duplex tray failure
Damaged gears in the duplex
5
paper feeding system
6
Main PCB failure
2
for the MP tray.
Cause
Cause
2-94
2
for paper tray 1 to 5,
Remedy
Remove the foreign object.
Reattach the eject actuator.
Reconnect the eject sensor harness.
Reconnect the eject motor harness.
Reattach the fuser cover.
Replace the eject sensor PCB ASSY.
Replace the eject motor.
Replace the main frame L ASSY.
Replace the fuser unit.
Replace the main PCB ASSY.
2
for the duplex tray.
Remedy
Remove the foreign object.
Reattach the fuser cover.
Replace the back cover.
Replace the duplex tray.
Replace the main frame L ASSY.
Replace the main PCB ASSY.
Confidential
Advertisement
Table of Contents
Troubleshooting
