Brother DCP-L5500D Service Manual page 67

Hide thumbs Also See for DCP-L5500D:
Table of Contents

Advertisement

Error message
First line
Size Mismatch
Reload correct paper.
Reload correct paper
in MP Tray, then press
[Retry].
Reload correct paper
in Tray1, then press
[Retry].
Reload correct paper
in Tray2, then press
[Retry].
Reload correct paper
in Tray3, then press
[Retry].
Reload correct paper
in Tray4, then press
[Retry].
Reload correct paper
in Tray5, then press
[Retry].
Supplies
Toner Low
Drum End Soon.
Replace Drum
Too Many Trays
Turn the power off and
remove additional
trays.
Touchscreen
Remove any material
initialization failed
which is on the
touchscreen.
Unable to
Check the firmware
Update:**
update file and try
again.
Second line
Detected that the size of paper set
in the paper tray was over 10 mm
shorter than letter size during
receiving fax data or printing a list
or report.
When printing from the MP tray,
the size of paper set in the MP tray
does not match the size specified
by the driver.
When printing from the paper tray
1, the size of paper set in the
paper tray 1 does not match the
size specified by the driver.
When printing from the paper tray
2, the size of paper set in the
paper tray 2 does not match the
size specified by the driver.
When printing from the paper tray
3, the size of paper set in the
paper tray 3 does not match the
size specified by the driver.
When printing from the paper tray
4, the size of paper set in the
paper tray 4 does not match the
size specified by the driver.
When printing from the paper tray
5, the size of paper set in the
paper tray 5 does not match the
size specified by the driver.
Dot counter or develop roller
counter of the toner is reaching
the upper limit.
The number of rotations of the
drum unit is reaching the upper
limit.
The number of rotations of the
drum unit has reached the upper
limit. (Printing does not stop.)
Detected more LTs than
connectible limit.
An error occurred while initializing
the touch panel.
Cannot execute USB Memory
Firm UPDATE.
2-32
Description
Error
Refer
codes
to:
8E02
2-66
9001
2-67
9002
2-67
9003
2-67
9004
2-67
9005
2-67
9006
2-67
4B01
2-45
4000
2-44
4200
2-44
6D00
2-50
D800
2-79
---
4.14.2
Confidential

Advertisement

Table of Contents
loading

Table of Contents