(2) Remove the two taptite bind B M4x12 screws. Release the hook, and open the upper
side of the hold cover 2.
(3) Release the main fan harness from the securing fixtures. Remove the main fan, and pull
out the main fan harness from the hole.
Hold cover 2
Taptite bind B M4x12
Main fan harness
Harness routing: Refer to
Assembling Note:
• Attach the main fan so that the surface with the label faces out.
Hook
Label
Fig. 3-89
"11. Rear side of the
3-89
Main fan
machine".
Confidential