4 Replacement Procedures
NOTE: When install the lamp unit, be careful not to bend or damage the reflection sheet.
Cross-section drawing of Z-Z
4-152
Downloaded from
www.Manualslib.com
P-chassis
Figure 4-164 Replacing 15.0 Inch Sharp fluorescent lamp (SXGA+) (12)
Install the lamp unit without floating.
Install the reflection sheet as it is placed
Install the lead wire into this groove.
Figure 4-165 Replacing 15.0 Inch Sharp fluorescent lamp (SXGA+) (13)
Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)
manuals search engine
(R) Lamp unit
Z
Z
inside the reflector.
4.18 Fluorescent Lamp