4 Replacement Procedures
Removing the LCD controller, top case, and cover assembly
1. Disconnect the FPC cable from the LCD controller (Control PCB) (1). Be careful not
2. Remove the LCD controller (2). Move the LCD controller to the left first.
3. Remove the top case (3). Be careful not to apply excessive force to the top case or
4. Remove the screws and cover assembly (Cover Ass'y) (4). Be careful not to apply
4-94
Downloaded from
www.Manualslib.com
to apply excessive force to the FPC cable.
gate TCP.
excessive force to the source TCP. The screw tightening torque is 2.0kgf.cm
maximum.
Figure 4-83 Replacing 14.1 Inch LG.Philips fluorescent lamp (2)
Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)
manuals search engine
4.18 Fluorescent Lamp