Toshiba Satellite A10 Maintenance Manual page 266

4 Replacement Procedures
7. Peel off four mask seals from the both sides of the display cover and remove the
8. Open the display and remove the following screws securing the hinges to the display
9. Open the display at 45-degree slant and remove the following screws securing the
10. Remove the display cover from the display assembly.
M2.5x2.8 THIN BIND
4-60
Downloaded from www.Manualslib.com
following screws securing the hinges to the display cover.
•
M2.5x2.8 THIN BIND screw
cover.
•
M2.5x6
hinges to the display cover.
•
M2.5x2.8 THIN BIND screw
M2.5x6 THIN BIND
Mask Seal
M2.5x2.8 THIN BIND
Figure 4-43 Removing Display Cover
Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)
manuals search engine
4.17 Wireless LAN Antenna/Display Cover/Speaker
THIN BIND screw
M2.5x2.8 THIN BIND
x2
x2
x2
Mask Seal
M2.5x2.8 THIN BIND